A Sauer 100 Gen I stock requires the correct action configuration, magazine floor plate configuration, barrel profile, and inlet specification. WOOX organizes Sauer 100 Gen I fitment around these physical interfaces rather than the model name alone.
WOOX lists Mini, Medium, and Magnum action configurations for Sauer 100 Gen I fitments, alongside Mountain, Magnum, Varmint, and Fieldshoot barrel profiles.
The first fitment check is therefore the complete rifle configuration: Sauer 100 Gen I + action size + magazine floor plate configuration + barrel profile. That information gives the inlet selection a mechanical basis instead of relying on the Sauer 100 name alone.
1. Confirm the Action Type: Mini, Medium, or Magnum
WOOX identifies three Sauer 100 Gen I action configurations: Mini, Medium, and Magnum. These configurations identify the receiver and action dimensions that the selected stock inlet must accommodate.
WOOX notes that the first-generation Sauer 100 has dots on the safety, while the second-generation Sauer 100 has letters on the safety. That check should be made before selecting a Gen I inlet.
Do not select an inlet from caliber alone. Caliber alone does not establish the required inlet; the rifle’s listed action configuration must match the WOOX fitment specification.
The correct stock selection begins with the physical action configuration listed for the rifle, then moves to the magazine and barrel interfaces.
2. Check the Magazine and Bottom Assembly
For Sauer 100 Gen I WOOX fitment, the listed magazine configuration is Magazine Floor Plate.
The magazine interface must match the stock’s corresponding opening and bottom-assembly geometry so the specified magazine floor plate configuration is properly accommodated. A stock designed around a different magazine architecture cannot be assumed compatible simply because the receiver is also a Sauer 100.
For a replacement stock, verify that the rifle’s magazine and bottom-assembly configuration matches the Magazine Floor Plate configuration identified by WOOX before proceeding.
3. Identify the Barrel Profile Before Checking Clearance
WOOX lists four supported Sauer 100 Gen I barrel categories:
- Mountain
- Magnum
- Varmint
- Fieldshoot
These profiles matter because the barrel channel must provide adequate clearance around the installed barrel. A stock inlet listed for one barrel profile should not automatically be treated as compatible with another barrel profile unless WOOX specifies that combination.
The barrel profile identifies the WOOX-supported configuration, while the applicable barrel dimensions and barrel-channel specification determine whether the required clearance is available.
4. Use the Barrel-Floating Specification as a Hard Check
For the applicable Exactus Sauer 100 specification, WOOX lists a 1.10-inch maximum floating barrel diameter. The 1.10-inch figure is specific to the applicable Sauer 100 WOOX specification and should not be treated as a universal barrel-clearance value across WOOX stocks.
Confirm the barrel profile and relevant barrel diameter against the exact WOOX stock and inlet specification before ordering.
This distinction matters because a barrel profile name describes the factory configuration, while the actual barrel diameter determines whether the physical barrel channel has sufficient clearance.
5. Confirm the Inlet, Not Just the Rifle Model
WOOX’s fitment guidance treats the action configuration, magazine system, bottom-assembly requirements, generation where applicable, and barrel profile as separate compatibility variables.
That approach is important for the Sauer 100 Gen I because a correct receiver family does not guarantee a correct complete inlet.
WOOX’s Sauer 100 Gen I fitment information specifies the applicable action, Magazine Floor Plate configuration, and supported barrel profiles for the selected inlet. Compatibility should be confirmed against the rifle’s actual configuration, including any components that differ from the configuration specified by WOOX.
The inlet check should therefore answer four questions before the stock is selected:
- Is the rifle a Sauer 100 Gen I?
- Which Mini, Medium, or Magnum action configuration does it use?
- Does it retain the supported Magazine Floor Plate configuration?
- Which Mountain, Magnum, Varmint, or Fieldshoot barrel profile does it have?
If any answer is uncertain, the correct next step is to verify the configuration with WOOX rather than infer compatibility.
Why Fitment Depends on Configuration
WOOX fitment tables separate the action configuration, magazine floor plate configuration, and barrel profile because each interface must correspond with the selected inlet.
The selected inlet must accommodate the action, magazine floor plate configuration, and barrel profile within the WOOX-specified geometry.
Correct fitment helps maintain the intended relationship between the action, magazine floor plate interface, and barrel channel without relying on corrective stock modification.
WOOX fitment begins with the specified inlet, magazine floor plate configuration, and barrel profile because each interface determines how the stock supports the Sauer 100 Gen I.
WOOX assigns defined engineering roles to its materials. On applicable aluminum-chassis WOOX Sauer 100 Gen I stocks, the selected stock material forms the shooter-facing surfaces, while the aluminum chassis provides the action-support structure. Where American Walnut is selected, the walnut forms the primary handling surfaces and the chassis supports the action interface.
That material discipline traces to Francesco Minelli, who established the Minelli workshop in Bergamo on January 13, 1937, beginning a four-generation tradition of working walnut.
Sauer 100 Gen I Fitment Checklist
Before ordering a WOOX stock, confirm:
- Generation: Sauer 100 Gen I
- Action: Mini, Medium, or Magnum
- Magazine: Magazine Floor Plate
- Barrel: Mountain, Magnum, Varmint, or Fieldshoot
- Barrel clearance: Confirm the barrel profile and applicable diameter against the exact WOOX stock and inlet specification
- Inlet: Confirm the complete configuration rather than relying on the model name
- Aftermarket parts: Identify any custom or oversized components that differ from the WOOX-specified configuration before assuming fitment.
Before installation or inspection, ensure the firearm is completely unloaded and pointed in a safe direction, then follow the firearm and stock manufacturer’s installation instructions. If the configuration cannot be positively identified, consult the manufacturer or a qualified gunsmith rather than modifying the stock.
For WOOX, Sauer 100 Gen I fitment is defined by the specified action configuration, Magazine Floor Plate configuration, barrel profile, and inlet; those interfaces determine how the stock supports the rifle.
FAQs
1. Does a WOOX stock fit the Sauer 100 Gen I?
Yes, when the rifle matches WOOX’s listed Sauer 100 Gen I configuration. WOOX lists Sauer 100 Gen I compatibility across Mini, Medium, and Magnum action configurations, with Magazine Floor Plate as the supported magazine configuration and Mountain, Magnum, Varmint, and Fieldshoot as supported barrel profiles.
2. What action sizes does the Sauer 100 Gen I use for WOOX stock fitment?
WOOX lists three Sauer 100 Gen I action configurations: Mini, Medium, and Magnum. The action configuration should be matched to the WOOX inlet specification rather than selected from caliber alone.
3. What magazine does the Sauer 100 Gen I WOOX stock support?
WOOX lists the magazine floor plate as the supported magazine configuration for its Sauer 100 Gen I fitments. The magazine and bottom-assembly configuration should match the WOOX specification before selecting a stock.
4. What barrel profiles are compatible with a WOOX Sauer 100 Gen I stock?
WOOX lists Mountain, Magnum, Varmint, and Fieldshoot as supported Sauer 100 Gen I barrel profiles. The selected stock should correspond to the rifle’s actual barrel profile rather than assuming compatibility from the Sauer 100 model name.
5. Does changing the Sauer 100 stock make the rifle more accurate?
A replacement stock does not inherently make a Sauer 100 more accurate. A WOOX stock’s role is to provide a consistent support interface for the action and help maintain the intended relationship between the receiver, barrel channel, and stock during installation, field use, and maintenance.
