remington 700 frequently asked questions

The Remington 700 is a popular rifle for many reasons, including its accuracy, reliability, and versatility. The 700 is a bolt-action rifle that is available in a wide range of calibers and configurations, making it suitable for a variety of different shooting applications, from hunting to long-range shooting. Additionally, the 700 has been in production for over 50 years, so it has a long history and a proven track record of performance. This combination of factors has made the 700 a favorite among shooters and hunters alike.

To remove the stock from a Remington 700 rifle, follow these steps:
- Ensure that the rifle is unloaded and the safety is engaged.
- Use a screwdriver or other appropriate tool to loosen and remove the screws that secure the stock to the rifle. These screws are typically located on the underside of the stock and near the front and rear of the trigger guard.
- Carefully separate the stock from the rifle, taking care not to damage the rifle or the stock.
- Once the stock is removed, you may need to remove additional screws or other fasteners to completely separate the stock from the rifle. Consult the manufacturer's instructions or a firearms expert for guidance if necessary.

It is important to note that modifying a rifle's stock may affect its performance and safety, so it is important to carefully consider the potential implications before making any modifications. It is also recommended to seek the guidance of a qualified firearms expert if you are unsure about how to properly remove the stock from a Remington 700 rifle.

To disassemble a Remington Model 700, follow these steps:

-  Make sure the rifle is unloaded and the safety is engaged.

- Remove the bolt from the rifle by pulling it to the rear and rotating it counterclockwise.

- Use a 3/16 inch Allen wrench to remove the bolt stop screw from the left side of the action.

- With the bolt stop screw removed, the bolt stop and bolt stop spring can be removed from the left side of the action.

- Use a 3/16 inch Allen wrench to remove the bolt stop plunger screw from the bottom of the action.

- With the bolt stop plunger screw removed, the bolt stop plunger and spring can be removed from the bottom of the action.

- Use a 3/16 inch Allen wrench to remove the trigger guard screws from the bottom of the action.

-  With the trigger guard screws removed, the trigger guard and magazine can be removed from the bottom of the action.

- Use a 3/16 inch Allen wrench to remove the safety detent plunger screw from the right side of the action.

- With the safety detent plunger screw removed, the safety detent plunger and spring can be removed from the right side of the action.


It is important to note that disassembling a rifle can be dangerous if done improperly, and it may void the warranty of the rifle. It is always best to consult a professional gunsmith if you are unsure about how to properly disassemble your rifle.

To change the stock on a Remington 700 rifle, follow these steps:
- Ensure that the rifle is unloaded and the safety is engaged.
- Use a screwdriver or other appropriate tool to loosen and remove the screws that secure the current stock to the rifle. These screws are typically located on the underside of the stock and near the front and rear of the trigger guard.
-  Carefully separate the current stock from the rifle, taking care not to damage the rifle or the stock.
-  Once the current stock is removed, you may need to remove additional screws or other fasteners to completely separate the stock from the rifle. Consult the manufacturer's instructions or a firearms expert for guidance if necessary.
- Place the new stock on the rifle, aligning it with the receiver and the trigger guard.
-  Use the screws or other fasteners that came with the new stock to secure it to the rifle. These fasteners may be different from the ones used to secure the original stock, so be sure to use the correct ones provided with the new stock.
-  Tighten the screws or fasteners securely, but be careful not to over-tighten them, as this can damage the rifle or the stock.


 It is important to note that modifying a rifle's stock may affect its performance and safety, so it is important to carefully consider the potential implications before making any modifications. It is also recommended to seek the guidance of a qualified firearms expert if you are unsure about how to properly change the stock on a Remington 700 rifle

To adjust the trigger on an older Remington 700, you will need to remove the stock and the trigger guard to access the trigger.
Once you have access to the trigger, follow these steps to adjust it:

Locate the adjustment screw on the bottom of the trigger. This screw controls the weight of the trigger pull.

Use a small screwdriver or Allen wrench to turn the adjustment screw clockwise to increase the trigger pull weight, or counterclockwise to decrease the trigger pull weight.

Test the trigger pull weight by pulling the trigger while holding the rifle securely.

Adjust the screw as needed until you have achieved the desired trigger pull weight.

Once you are satisfied with the trigger pull weight, reassemble the rifle and test the trigger again to make sure it is functioning properly.

It is important to note that adjusting the trigger on a rifle can be dangerous if done improperly, and it may void the warranty of the rifle. It is always best to consult a professional gunsmith if you are unsure about how to properly adjust the trigger on your rifle.

To determine which Remington 700 model you have, you can look for identifying information on the rifle itself, such as the serial number or model number.
 The serial number is typically located on the receiver, near the front of the rifle, and the model number is often located on the barrel, near the receiver

You can also consult the owner's manual or contact the manufacturer for more information. Additionally, you can identify the specific model of your Remington 700 by its features and characteristics. For example, the Remington 700 SPS (Special Purpose Synthetic) has a synthetic stock and a matte black finish, while the Remington 700 ADL (ADL) has a wood stock and a blued finish. The Remington 700 BDL (BDL) has a wood stock with a satin finish and a hinged floorplate, while the Remington 700 CDL (Classic Deluxe) has a polished blue finish and a classic-style walnut stock. The specific features and characteristics of your rifle can help you determine which model you have.

The serial number for a Remington Model 700 rifle is typically located on the receiver, near the front of the rifle. The serial number is usually stamped into the metal of the receiver, and it may be covered by the stock when the rifle is assembled. To access the serial number, you may need to remove the stock from the rifle, or you may be able to see the serial number through a small opening in the stock.

 If you are unable to locate the serial number on the receiver, you can also check the owner's manual or contact the manufacturer for more information. The serial number is a unique identifier that is assigned by the manufacturer, and it can be used to track the history and ownership of the rifle. It is important to record and keep track of the serial number for your rifle, as this can be useful in the event that the rifle is lost or stolen.

Serial Numbers by date
M - 1921 N - 1922 P - 1923 R - 1924 S - 1925 T - 1926 U - 1927 W - 1928 X - 1929 Y - 1930 Z - 1931 A - 1932 B - 1933 C - 1934 D - 1935 E - 1936 F - 1937 G - 1938 H - 1939 J - 1940 K - 1941 L -1942 MM - 1943 NN - 1944 PP - 1945 RR - 1946 SS - 1947 TT - 1948 UU - 1949 WW - 1950 XX - 1951 YY - 1952 ZZ - 1953 A - 1954 B - 1955 C - 1956 D - 1957 E - 1958 F - 1959 G - 1960 H - 1961 J - 1962 K - 1963 L - 1964 M - 1965 N - 1966 P - 1967 R - 1968 S - 1969 T - 1970 U - 1971 W -1972 X - 1973 Y- 1974 Z - 1975 I - 1976 O - 1977 Q - 1978 V - 1979 A - 1980 B - 1981 C - 1982 D - 1983 E - 1984 F - 1985 G -1986 H -1987 I - 1988 J - 1989 K - 1990 L - 1991 M - 1992 N - 1993 O - 1994 P - 1995 Q - 1996 R - 1997 S - 1998 T - 1999 U - 2000 V - 2001 W - 2002 X - 2003 Y - 2004 Z - 2005 A - 2006 B - 2007 C - 2008 D - 2009 E - 2010 F - 2011 G - 2012

The weight of a Remington 700 stock can vary depending on the specific model and material it is made from. 
A standard factory Remington 700 stock is typically made from wood or a synthetic material such as polymer, and it weighs between 2 and 3 pounds.

Aftermarket stocks, on the other hand, can be made from a wider range of materials, including carbon fiber and aluminum, which can make them significantly lighter than the factory stock. Some aftermarket stocks weigh as little as 1 pound or less, while others can be quite heavy depending on the materials and features they offer.
It's important to consider the weight of the stock when choosing one for your rifle, as a heavier stock can affect the overall balance and handling of the rifle.

The Remington Model Seven (Model 7) and the Remington Model 700 are both very popular bolt-action rifles. While they share many similar features, there are also some key differences between these two rifles.

One of the main differences between the Model 7 and the Model 700 is their size and weight. The Model 7 is a compact rifle that is designed for fast handling and easy carrying in the field. It has a shorter barrel and a lighter weight than the Model 700, making it a good choice for hunting in dense brush or other tight spaces.

 Another key difference between the Model 7 and the Model 700 is their actions. The Model 7 uses a short-action design, which allows it to chamber cartridges with a shorter overall length. This makes it a good choice for cartridges such as the .243 Winchester and the .308 Winchester. The Model 700, on the other hand, uses a long-action design that allows it to chamber longer cartridges such as the .30-06 Springfield and the .300 Winchester Magnum.

 In terms of accuracy, both the Model 7 and the Model 700 are known for their accuracy and reliability. However, the Model 7 has a reputation for being particularly accurate due to its short, stiff barrel and its crisp, smooth action. The Model 700 is also accurate, but it is generally considered to be more suited to long-range shooting due to its longer barrel and larger cartridge capacity.

 Overall, the main differences between the Remington Model Seven and the Remington Model 700 are their size, weight, action, and cartridge capacity. Both rifles are excellent choices for hunting and shooting, but the Model 7 is better suited to fast handling and close-range shooting, while the Model 700 is better suited to long-range shooting and larger cartridges.

Yes, you can shoot 7.62x51 ammunition in a rifle chambered for .308 Winchester, such as a Remington 700. The 7.62x51 cartridge is essentially the same as the .308 Winchester, but it has a slightly longer overall length and slightly higher pressure. This means that 7.62x51 ammunition will work just fine in a rifle chambered for .308 Winchester, but the reverse is not true. It is not safe to shoot .308 Winchester ammunition in a rifle chambered for 7.62x51, as the higher pressure of the .308 Winchester cartridge could cause the rifle to malfunction or even explode.

Always make sure to use the correct ammunition for your rifle, and consult a professional gunsmith if you have any doubts.

The best Remington 700 stock for the money will depend on your specific needs and preferences. The Remington 700 is a popular and versatile rifle, and it is available in a variety of different configurations and options.

 When choosing a Remington 700 stock, it is important to consider factors such as the intended use of the rifle, the material and construction of the stock, and the compatibility with other components and accessories. It is also important to consider your budget and the overall value for the price. Comparing different options and reading reviews from other users can be helpful in finding the best Remington 700 stock for your needs and budget.

As with any upgrade, the best stock for your Remington 700 will depend on your individual needs and preferences. That being said, there are a few stocks that are popular among shooters looking to upgrade their rifle.  We suggest you to check out our Rem 700 aftermaket stocks selection.

Rem700 fitted in our Furiosa Chassis micarta version.

Each of these stocks offers a number of improvements over the factory stock, such as improved ergonomics, enhanced accuracy, and better overall performance. It's always a good idea to do some research and handle a few different stocks before making a decision to ensure that you choose the best one for your rifle and shooting style

Yes, we have many aftermarket stocks available for the Remington 700 that are designed for left-handed shooters. Ourstocks are made to the same high standards as right-handed stocks, and they provide the same level of stability and accuracy. 

In addition to being left-handed, these stocks also have other features such as adjustable cheek pieces and length-of-pull to help customize the fit of the rifle to the shooter. It is always best to consult a professional gunsmith before installing a new stock on your rifle to ensure proper fit and function.

There are many good options for stocks for the Remington 700 that would be suitable for hunting. We suggest you to check out our Hunting stock selection.

Rem700 fitted in WOOX WIld Man stock - Walnut version.

Ultimately, the best stock for you will depend on your personal preferences and the type of hunting you plan to do. It's a good idea to do some research and handle a few different stocks before making a decision to ensure that you choose one that suits your needs and shooting style

The original Remington 700 stock is made from wood or synthetic material, and it is designed to provide a stable platform for the rifle.

A chassis system is a type of aftermarket stock that allows you to install a Remington 700 action into a more versatile and adjustable platform. A chassis system typically consists of a frame or skeleton that holds the action and provides attachment points for the barrel, grip, and other components. Chassis systems are often made from aluminum or other lightweight materials, and they typically have adjustable features such as an adjustable cheek piece and length-of-pull.

 In comparison to a traditional stock, a chassis system offers several advantages. It allows you to install a Remington 700 action into a more versatile platform that can be easily adjusted to fit the shooter. Chassis systems also often have more attachment points for accessories such as bipods and night vision devices. However, chassis systems can be more expensive than traditional stocks, and they may require some gunsmithing work to install. 

In the picture our Cobra stock - Tiger wood finishing version

It is always best to consult a professional gunsmith before attempting to install a chassis system on your rifle.

In terms of factory-made rifles, the Remington 700 is generally considered to be very accurate, with some models capable of producing groups of less than 0.5 inches at 100 yards when used with high-quality ammunition. However, the accuracy of any rifle can be affected by a variety of factors, including the quality of the ammunition, the skill of the shooter, and the condition of the rifle. With the right combination of these factors, the Remington 700 has the potential to be an extremely accurate rifle.

The value of a Remington Model 700 in .270 Winchester will vary depending on a number of factors, including its condition, age, and any modifications that may have been made to it. In general, a used Remington Model 700 in good condition can be worth anywhere from $400 to $800, depending on the specific model and its features. If the rifle is in excellent condition, has been well-maintained, and has any additional accessories or customizations, it could be worth even more.

To get a more accurate idea of the value of your rifle, you can consult a gunsmith or a professional appraiser.

It is possible that some Remington 700 stocks may be interchangeable, but this will depend on the specific model of the rifle and the compatibility of the stocks. The Remington 700 is a popular and versatile rifle, and it is available in a variety of different configurations and options. Some models may have interchangeable stocks, while others may not. It is best to consult the manufacturer's specifications or consult with a firearms expert to determine the interchangeability of stocks for a specific Remington 700 model.

It is possible that a Remington 700 stock may fit a Remington 770 rifle, but this will depend on the specific models and the compatibility of the stocks. The Remington 700 and 770 are both popular and versatile rifles, but they are not identical and may have different dimensions and features. Therefore, it is best to consult the manufacturer's specifications or consult with a firearms expert to determine the compatibility of the stocks for a specific Remington 700 and 770 model. It is also important to note that modifying a rifle's stock may affect its performance and safety, so it is important to carefully consider the potential implications before making any modifications.

It is possible that a Remington 700 stock may fit a Remington 710 rifle, but this will depend on the specific models and the compatibility of the stocks. The Remington 700 and 710 are both popular and versatile rifles, but they are not identical and may have different dimensions and features. Therefore, it is best to consult the manufacturer's specifications or consult with a firearms expert to determine the compatibility of the stocks for a specific Remington 700 and 710 model. It is also important to note that modifying a rifle's stock may affect its performance and safety, so it is important to carefully consider the potential implications before making any modifications.

No, both the 788 and the 700 were bolt actions, but the similarity ends quickly. Theie stocks are not interchangable

It is unlikely that a Remington 700 stock will fit a Savage Axis rifle, as these two rifles are not compatible. The Remington 700 and Savage Axis are both popular and versatile rifles, but they are not identical and have different dimensions and features. The stock of a rifle is an important component that affects its performance and handling, so it is important to use the correct stock for the specific rifle. It is best to consult the manufacturer's specifications or consult with a firearms expert to determine the compatibility of the stocks for a specific Remington 700 and Savage Axis model.

There are a few different stocks that would be suitable for use with a bull barrel on a Remington 700. We suggest you to check out our Rem 700 aftermaket stocks selection.
These stocks are designed to be compatible with a variety of barrel contours, including bull barrels, and offer a number of features that make them well-suited for use on a hunting rifle, such as improved ergonomics and enhanced accuracy. Ultimately, the best stock for you will depend on your personal preferences and the type of shooting you plan to do. It's a good idea to do some research and handle a few different stocks before making a decision to ensure that you choose one that suits your needs and shooting style.

Yes. Bergara B14 and Remington 700 Chassis Compatibility is true. Stocks/chassis (but also rails, and triggers) all share the R700 footprint. Said that Make sure you select the right model in term of SA/LA and BDL vs DB. At the link below our Bergara compatibility guide 

The Remington 700 and the Howa 1500 are both popular bolt-action rifles, but they use different action and bolt patterns, so their stocks are NOT directly compatible

There are many aftermarket stocks available for the Remington 700 that have an adjustable cheek piece, which allows the shooter to customize the height of the cheek piece for a comfortable and consistent cheek weld. Here you can find some of our popular options 

WOOX stocks are made from high-quality materials and are designed to provide a stable platform for long-range shooting. In the Picture our Exactus stock FDE finishing version

In addition to the adjustable cheek piece, many of these stocks also have adjustable length-of-pull and buttpad height to further customize the fit of the rifle to the shooter.

The Remington 700s commonly used for hunting, target shooting, and long-range competition. While the original Remington 700 did not have a detachable magazine, all our many aftermarket stocks allow you to convert your rifle to use detachable magazines.
Hereyou can find some of our popular options 

WOOX stocks are made from high-quality materials and are designed to provide a stable platform for long-range shooting. In the Picture our Cobra stock  - walnut  finishing version

These stocks are made from high-quality materials and are designed to provide a stable platform for long-range shooting. In addition to the detachable magazine, many of these stocks also have features such as an adjustable cheek piece, adjustable length-of-pull, and a buttpad for added comfort and customization.